All Hex Lab rims are engineered and crafted using our Oversized Technology. We’ve carefully studied the load paths from the bars through the stem, headset, fork, axle, hub to the spokes and into the rim for steering stiffness. The same approach was taken via the pedals through the cranks and other components on the way to the rear rim for pedaling stiffness. That extra stiffness will net you more power to the ground out back, and upfront, you'll feel in control. When combined with Box's other Oversized components, you'll experience heightened responsiveness and reduced latency. Due to their compatibility with tubeless and tubed configurations, these rims have a broad range of tire options and setup possibilities, making them perfect for any track.
Key Differences: The Hex Lab Carbon BMX Rims are the only rims in the Box line-up to be blessed with Oversized Technology. They are also the only model to use Ultra High Modulus Carbon Fiber (stiffer than other carbons variants). Take notice of the unique Symmetrical Dihedral Angle Stabilizers. Yes, it’s a mouthful but each of those words carries meaning. The sculpted bullet-shaped spoke beds are designed to bridge the angle between the rim's angled flanks and the vertical plane. With that, we achieve the stability, stiffness, and durability of a much broader rim profile without actually taking on most of the extra material.
- Foil Stamped Chrome Logos
- Brake (Rear) and Brake-Less (Front) Profiles
- Machined Brake Track
- High-Response & Low Latency
- Symmetrical Dihedral Angle Stabilizers
- Ultra High Modulus Carbon Fiber
PLEASE NOTE: Hex Lab Carbon BMX Rims with brake tracks require Carbon Brake Pad Inserts and CANNOT be used with standard Brake Pads made for aluminum Rims. Box Carbon BMX hoops are compatible with Box One Carbon Replacement Pads. Use of other brake pads will void warranty.
Hole Drilling: 36 Hole
Internal Rim Width: 30mm
Material: Ultra High Modulus Carbon Fiber
Weight: 315 grams (front and rear)
Please note: weight may vary by 10% due to carbon manufacturing processes.
Q: What is the recommended spoke tension for this rim?
A:We recommend a spoke tension of between 110kg and 115kg; remember, every rim is different.
Q: What lacing pattern is best for this rim?
A: This is a question dependent on many variables; Please check out some of our build information available at box https://boxcomponents.com/collections/support
Q. What spoke length do I need to build this rim?
A: This is a question dependent on many variables; Please check out some of our build information available at https://boxcomponents.com/collections/support
Q. Which direction is the drive side?
A: Locate the drive side sticker on the rims.