Box One Quantum Hubset 36h Black - boxcomponents
Box One Quantum Hubset 36h Black - boxcomponents
Box One Quantum Hubset 36h Black - boxcomponents
Box One Quantum Hubset 36h Black - boxcomponents
Box One Quantum Hubset 36h Black - boxcomponents
Box One Quantum Hubset 36h Black - boxcomponents

Box One Quantum 36H 20mm hubset black

$349.99 Sale Save
1 review

Only 0 left in stock

SKUBX-HU1620S36-BK

All Box hub sets that with axle diameters of 15mm and up are engineered and crafted using our Oversized Technology. For steering stiffness we follow the load paths down the handlebars, through the stem, headset, and eventually to the fork-to-hub interface. To transfer as much of that load from fork to axle we’ve shaped the dropout for substantially more capture of the now oversized 20mm axle. Its the same fundamentals at the rear for pedaling stiffness where we also deploy more substantial diameters to inhibit axle deflection. On both ends the added surface area begs for upsized bearings and consequently we are gifted with materially more contact surface. You’ll put more power to the ground out back and up front you’ll feel in control.When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.

Key differences:The Box One line tunes material distribution to a higher level than Box Two through its CNC process. Aluminum can more accurately be removed from low stress areas to reinforce intersections. Box One’s unique and hard chromoly one-piece driver accepts various (10,15,20mm) diameter oversized axles at the rear while the front is set at 20mm.

Oversized Technology™
• Increased Steering Stiffness
• Heightened Responsiveness
• Reduced Latency
• Inhibits Axle Deflection
• Available With Multiple Axle Diameters To Fit All BMX Racing Frames

Includes thru axles and 16t driver. 10 / 15mm rear axle conversion kits sold separately.

Box One Quantum Rear Axle Kit 10mm Thru
Box One X2 Pro Carbon 1 1/8" Cro-Mo Steerer 20" X 20mm Fork
Box One X5 Pro Carbon 1.5" to 1 1/8" Alloy Steerer 20" X 20mm Fork
Box One 24x1.75" 36-Hole Front Rim Black
Box One 20x1.75" 36-Hole Front Rim Black

Material:
• Hubshell: Cold-Forged 7075-T6 Aluminum
• Axle: Chromoly Steel
• Driver: Chromoly Steel
Process:
• Hubshell: CNC
• Axle: CNC
• Driver: CNC
Flanges: Straight
Hole Drilling: 36
Bearings: Sealed 6-Pawl 60 Points of Engagement
Hardware: Steel
Finish: Anodized w/Laser-Etched Graphics
Compatibility:
• Driver: Freewheel
• Brake: Rim Brake
Size:
• Axle
• Front: 20mm
• Rear: 10mm, 15mm, 20mm
Weight: 765g/26.9oz

I don't know how to build wheels, does this hub come in a pre-built wheelset?
Yes, this hub is built to our Box One Pro Rim with Box One Pro Spokes In our Box Three Wheelsets.

What spoke lengths should I use when building this wheel to a Box Rim?

We have published recommended lacing patterns and spoke lengths for all Box Hub to Box Rim wheel builds on www.boxcomponents.com/service

Can I radially lace this hub?

No, Box does not recommend radially lacing on any Box Components hub.

What should I used to Clean this hub and the internals?

The internals can be easily disassembled by removing the drive-side lock-nut; the internals can be wiped down with a lint-free rag and mild de-greaser and re-greased with a light amount of grease on the outside of the pawls. Too much grease could cause the pawls to stick or skip. Only disassemble if an issue is present.

Customer Reviews
5.0 Based on 1 Reviews
5 ★
100% 
1
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
RR
06/02/2022
Richard R.
United States

High quality parts!

Overall I am pleased with these hubs. The bearings roll smoothly and the quality is high. I found the rear axle too short for my frame dropouts (Speedco M2) and had to machine new spacers to allow me to use the supplied rear axle in my frame.